Publicité
Les langues disponibles
Les langues disponibles
FINAL OPERATIONS
Securing the covers
When the connections and adjustments have been made, drill the cover
at the point marked at the top for the left-hand gearmotor and at the
bottom for the right-hand gearmotor.
Ø12 mm
Connect the earth wire to the motor. Put on the
cover.
Secure the side covers on the pillar bracket using two screws on each
side and one on the top.
Hole for the left-hand
motor release rod
Hole for the right-hand
motor release rod
Place the side covers on the sides of the middle cover.
M4x20 special
screw
UNI 6954 3.9x16
screw
Publicité
