Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
⚠ The following illustrations are only examples, given that the space for securing the operator and accessories varies
depending on the overall dimensions. The installation technician is responsible for choosing the most suitable solution.
Installing corrugated tubes
Set up corrugated tubes for the connections coming from the junction box.
N.B. the number of tubes depends on the type of system installed and any accessories.
Securing the brackets
N.B. the drawings refer to installation of the left-hand gearmotor. The installation of the right-hand gearmotor is symmetrical.
Determine the fixing point for the gate bracket and calculate the fixing point of the pillar bracket, respecting the values shown in the drawings and table.
Pillar bracket
Gate bracket
A
450
Application size (mm)
Leaf opening (°)
90°
120°
A
B
150
0 - 380
200
0
Publicité
