Publicité
Les langues disponibles
Les langues disponibles
ing the cutting device.
•
Regularly check the grass collection
device for wear and strains. For safety
reasons, replace worn or damaged
parts. When adjusting the blades, take
particular care to avoid fingers being
trapped between the rotating blades
and fixed parts of the machine.
•
Check that only replacement tools au-
thorised by the manufacturer are used.
Electrical Safety:
•
Ensure that the mains voltage match-
es the specifications on the rating
plate.
•
If possible, connect the equipment only
to a socked with a residual current-
operated protective device (RCD) with
a release current of more than 30 mA.
•
Avoid bodily contact with earthed
parts (e.g. metal fences, metal posts).
•
Use only authorised power cables of
type H05VV-F or H05RN-F, which are
no more than 75 m long and suitable for
outdoor use. The power cable wire cross
section must be at least 1.5 mm
completely unroll cable drums before
use. Check the cable for damage.
•
To fix on the power cable, use the cable
suspension intended for the purpose.
•
Keep the power cable away from the
cutting tool when working. The cutting
blades may damage the power cable
and result in contact with live parts. Al-
ways run the power cable behind the
operator.
•
Do not run the appliance on a damaged
or worn cable.
•
Switch off the equipment and discon-
nect the plug from the socket if the
power cable is damaged. If the power
cable for this equipment is damaged,
it must be replaced with a special
power cable, which is available from
the manufacturer or a customer serv-
ice agent of the same.
•
Do not connect a damaged power cable
to the mains. Do not touch a damaged
power cable when it is connected to the
mains. A damaged power cable may
result in contact with live parts.
General Description
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level.
It features a powerful electrical drive, a
sturdy plastic casing, a safety switch, a
collision guard as well as a grass catcher
with level gauge. Additionally, the equip-
ment is height adjustable to six levels and
has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
. Always
2
Summary
10 Housing
11 Cutting height adjuster
12 2 carrying handles
13 Cable holder
14 Cable strain relief
15 Connection cable
The illustration how to handle the ap-
pliance can be found on page 2-4.
1 Curved handle
2 Start lever
3 Top clamping levers
4 Lower bar
5 Collision guard
6 Bottom clamping levers
7 Grass catcher
8 Back wheels
9 Front wheels
GB
71
Publicité
