Publicité
Les langues disponibles
Les langues disponibles
Page 2
eep page. 28 open when
reading
the Oper-
ating | tnstructions: :
Bitte Klappen Sie beim Lesen der Bedienungs-
anieitung die Seite 28.aus
3 . Sia bi het Been: "yan "de gebruiksaanwijzing
a pagina 28 uit
;
Sivu 27
tutustuessanne laitteen
. Seite 5
English
Controls, connections etc.
1
mains switch
high filter
contour
volume
balance
bass
'treble
socket for stereo headphones
audio mute
@© low filter
@ source/monitor selector
42) mono/stereo selector with indicator
@3) source selector
meter for output power right channel
@ meter for output power left channel
BOGOOSOOOOE
Fig. 2
@0) socket for recorder B
@1) socket for recorder A
@) socket for record player
@3) socket for MFB-enclosures
@4) socket for loudspeaker right-rear
@5) socket for loudspeaker right-front
@6) socket for loudspeaker left-front
@2). socket for loudspeaker left-rear
socket for tuner
@9) socket for monitor output
Installation
Checking the mains voltage
Before connecting the set to the mains supply
check that the operating voitage, indicated on the
type plate at the near, is that of your local mains
voltage. {f it is not, do not connect the set to the
mains but consult your dealer.
Remark: Some versions have a voltage adapter. If
the preset operating voltage does not correspond
with your mains voltage, turn the adapter with a
coin until the correct value appears.
- Note:
(U.K. only): When fitting a mains plug to the mains
lead, please proceed as follows:
The wires in the mains lead are coloured in ac-
cordance with the following code:
Blue - Neutral
Brown - Live
~ As these colours may not correspond with the
colour markings identifying the terminals in your
plug proceed as follows:
The Brown wire must be connected to the termi-
Publicité
