Télécharger Imprimer la page

Hürner CNC ECO 160 Manuel Utilisateur page 27

Publicité

Les langues disponibles
  • FR

Les langues disponibles

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
1
Introduction
Dear Customer:
Thank you very much for purchasing our product. We are confident
that it will bring you success and meet your expectations.
The development, manufacture, and check of the heating element
butt-welding machine HÜRNER CNC ECO 160 has been per-
formed with a view to superior operation safety and user-friendliness.
The machine was manufactured and checked according to state-of-
the-art technology and widely recognized safety regulations, as they
are applied.
To ensure maximum operation safety, please conform to the appropri-
ate messages in this booklet and the regulations for the prevention
of accidents.
Thank you.
2
Safety Messages
2.1
The User's Manual
This User's Manual contains important instructions for the intended
and safe operation of the product. Every person who operates the
product has to conform to the instructions of this manual. All rights,
in particular the right to copy or reproduce (in print or electronic
form) and distribute as well as to translate, are reserved and subject
to prior written consent.
2.2
Explaining Icons
The following expressions and icons are used in this User's Manual to
refer to safety-related issues:
This icon indicates that non-compliance may result in a haz-
ardous situation that possibly causes bodily injury or material
damage.
Caution
This icon indicates important messages related to the correct
use of the product. Non-compliance may cause problems of
operation and damage to the product.
Important
This icon indicates tips and useful information for using the
product more efficiently and more economically.
Info
2.3
Operating the Product Safely
For your own safety, comply with the following instructions
• Protect the power supply cord and the hydraulic pressure lines
from cutting edges. Have an authorized service shop replace dam-
aged cables or lines immediately.
• The product may be operated and serviced exclusively by autho-
rized staff who were briefed on it.
• The product may be operated only when observed.
• Before operating the product, always check for damaged parts
and have them repaired or replaced by an authorized service shop
as needed.
• The cover caps of the hydraulic lines and interface port have to
Version February 2018
HÜRNER CNC ECO 160 User's Manual
5
EN

Publicité

loading