Güde TKGS 254.2 Traduction Du Mode D'emploi D'origine page 32

ENGLISH
32
instructions from this manual does not make the
manufacturer liable for damages.
It is strictly prohibited to disassemble,
modify and purposely remove the protective
equipment on the unit and fit other protective
equipment instead.
Residual risks
Even when the device is used properly and all safety
regulations are complied with, there still may be some
residual risks.
· noise emissions
· dust emissions
· vibrations to hand and arms
· Danger of burns
Tool and workpiece heat up during operation.
· Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING/Caution!
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Unplug the machine before any work
on it.
Wear eye protective goggles !
Wear ear protectors!
Wear a suitable dust protection mask.
Wear gloves!
Always keep hands away from the path of
the saw blade.
Keep dry at all times.
Never expose tool to rain.
Warning against dangerous electric
voltage
Warning against cutting injury
Keep distance of persons
Observe to keep out of dangerous zone
Class II tool.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
CE marking
WARNING! LASER RADIATION
V
Rated voltage
~
AC Current
n
Rated idle speed
0
General safety information
WARNING!
When using electric tools the following general safety
instructions must be obeyed to protect yourself from
electric shocks, injury and fire risks.
Read all these instructions before using this electric
tool and keep the safety instruction in a safe place.
Keep your work area clean and tidy. Untidy work-
places and workbenches increase the risk of accidents
and injuries.
Do not expose the appliance to rain and do not use
it in wet or moisture conditions.
Provide adequate lighting or good lighting condi-
tions when working with the machine.
Do not work with electric tools in conditions with