Güde TKGS 254.2 Traduction Du Mode D'emploi D'origine page 31

Deutsch
Technical Data
Flip over combination mitre / bench saw
Art. No
Rated voltage
Rated frequency
Rated input
Rated idle speed
Saw blade ø
Saw blade thickness
Saw blade bore diameter
Splitter thickness
Max. cutting depth when operating the tabletop circular saw
Mitre saw Max. cutting capacity
Mitre 0° x Bevel 90°
Mitre 0° x Bevel 45°
Mitre 45° (left) x Bevel 90°
Mitre 45° (right) x Bevel 90°
Mitre 45° (left) x Bevel 45°
Mitre 45° (right) x Bevel 45°
Workpiece dimensions min.
Inner diameter – suction nozzles
Weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to EN 61029; Uncertainty K = 3 dB (A)
Wear ear protectors!
The numerical values given are emission levels and not necessarily safe working levels. Although there is a
correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to
determine whether or not any additional safety measures are necessary. The characteristics of the work space,
other sources of noise, i.e. the number of machines and other processes running in the vicinity and so on, are all
factors that can influence the actual exposure levels of the employees. Moreover, the acceptable exposure levels
can vary from country to country. This information should enable the machine's operator to carry out a better
assessment of the risks and hazards.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The saw is intended solely for sawing profiled timber
within the cutting performances specified in the
technical data.
Not observing general regulations in force and
ENGLISH
31
TKGS 254.2
55269
220~240V
50 Hz
1800 W
4800 min -1
254 mm, 48 Z
2,6 mm
30 mm
2 mm
60 mm
70x130 mm
48x130 mm
70x85 mm
70x64 mm
48x38 mm
48x83 mm
200 x 10 mm
30 mm
15 kg
94,5 dB (A)
108 dB (A)