2.Connect the torsion bar (B-1) to the other side of the bar (B-2). Once inserted,
screw (A-A-1) it into place.
3.Hammer left roller support with gear box (D-3) into the left side of the torsion bar
with gentle strength. Tighten the screw with screwdriver.
05
Fabric Assembly
1.Open the fabric box carefully to ensure that the product is not damaged.
2.Unfold both pieces of awning fabric. You should have one large fabric piece (M) and a
valance with scalloped edge (O). You should also have three fabric liner cords (N).
3. Thread the fabric liner cords through both ends of the large awning fabric (M) as well
as the valance (O). This may be a slow process and is easier with two people.
9
EN