Costway NP10517 Manuel De L'utilisateur page 15

WARNING
Mounting Height
It is important to take the awning's drop area into consideration before bolting your wall
mounts. If you would like to mount above a patio door, for example, please leave at least
20cm above the door frame and be sure that the awning does not interfere with opening
and closing the door. The drop angle can only be changed minimally, so take this into
consideration when deciding where to place your awning.
We recommend that the
awning surface make an
angle of about 80 degrees to
the wall when open.
01
Measuring the Mount Site
1.Measure the length of your awning along the wall where you intend to install it. This
line will be the highest point of your awning and align with the top of the wall bracket.
Use a leveler to make a chalk line across the distance.
2.Important: Double check that the line is level all the way across.
3.Be sure that the line is centered over the patio door, window, or other feature, if
applicable.
Failure to securely fasten all the brackets to the wall could
result in the collapse of the awning and cause personal
injury or death.
Recommended installation height: 2.5m-4m.
The ideal drop angle (when fully extended) has
already been set in the factory, so you may not
have to change the pitch/angle.
CALCULATIONS:
You can use the following formula to calculate the
appropriate angle.
C = A + 0.17*L
A = The desired height of the front bar
L = The length of the arm stretched out
C = The height of the wall brackets
15
EN