3. At this time, you will have one full-length front bar, with both pieces connected
and screwed securely into place.
04
Connecting Torsion Bars
WARNING
1.Gather the two white torsion bars with pre-assembled arms (B-1,B-2), and lay
them in a line.
B-1
C-1
C-1
DO NOT remove the safety wrap that holds the arms down!
Kindly make sure to use correct direction armrest to
assemble, the awning will be easily damaged if you use
wrong armrest.
L-1
C-2
A-A-1
C-2
8
B-2
L-2
EN