Costway NP10517 Manuel De L'utilisateur page 13

4. Two screw nuts (F) need to be installed on the arm-bar links (Q). First insert the
arm-bar links (Q) to the holes on the end of both arms. Then tighten the screws on
the arm-bar links and fix the links and arms with two screw nuts (F). (Note: Do not
fully tighten the screw nuts, leaving about 13mm/0.5" space in between.)
5.After above steps, it is safe to cut the safety wraps that hold the arms and torsion
bars.
Awning assembly is complete now!
tighten
If you find that the fabric wraps unevenly or that the two
arms won't open together at the same time, look at the
stability of the two arms. Solution: adjust the arm bar
link's position on the front bar outwards, as necessary.
13
tighten