Costway NP10517 Manuel De L'utilisateur page 11

6.Roll the awning fabric counterclockwise around the roller tube as tightly and
evenly as possible.
7.Thread the valance (O) through the other slot in the front bar all the way to the
end.
8.Slide arm-bar link (Q) into the groove of the front bar on left side. Then fix plastic
cover (N-1) on the end of front bar (C-1).
9. Slide another arm-bar link (Q) into the groove of the front bar on the right side.
Put the bolt (P), fix the front bar end with a plastic cover (N-2), then tighten the
screw on the bolt (P).
11