Playing A Tape - Sony MHC-RXD5 Mode D'emploi

3
Press 6 and insert a blank tape into
deck B.
With the side
you want to
record facing
forward
4
Press REC PAUSE/START.
Deck B stands by for recording.
5
Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
6
Press REC PAUSE/START.
Recording starts.
To stop recording
Press p.
Tips
• If you want to record from the reverse side, press
TAPE B 9 to light its indicator after pressing
REC PAUSE/START in step 4.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, use + and – in step
2 to tune in the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing REC
PAUSE/START in step 4.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.

Playing a tape

You can use any type of tape, TYPE I
(normal), TYPE II (CrO
since the deck automatically detects the tape
type. You can also use the jog dial's AMS*
functions to quickly search for songs you
want to hear. To select either deck A or B,
press DECK A ( or DECK B ( on the
remote.
3
(Power)
6
DOLBY NR
1
0 / )
2
◊
√
) or TYPE IV (metal) ,
2
VOLUME
+/–
p
6
Jog dial
1
p
= +
0 )
DECK A (
DECK B (
VOL +/–
continued
15 GB