Recording A Cd; Cd Synchro Recording - Sony MHC-RXD5 Mode D'emploi

Recording a CD

— CD Synchro Recording

The CD SYNC button lets you record from a
CD to a tape easily. You can use TYPE I
(normal) or TYPE II (CrO2) tapes. The
recording level is adjusted automatically.
(Power)
6
4
1
Press 6 and insert a blank tape into
deck B.
With the side
you want to
record facing
forward
GB
12
DISC SKIP/
EX-CHANGE
CD
DOLBY NR (P
5 3
p
2
Press § and place a CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
EX-CHANGE repeatedly so that it lights
green.
With the label
side up. When
you play a CD
single, place it
on the inner
circle of the
2
tray.
3
Press CD SYNC.
Deck B stands by for recording and the
CD player stands by for playback. The
indicator on TAPE B ( (for front side)
lights up.
4
Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
5
Press REC PAUSE/START.
6
Recording starts.
To stop recording
1
Press p.
Tips
• If you want to record from the reverse side, press
TAPE B 9 to light its indicator after pressing CD
SYNC.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing CD
SYNC.
Note
You cannot listen to other sources while recording.