2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Jack type A
Extend the FM lead
antenna horizontally.
AM loop antenna
Jack type B
Extend the FM lead
antenna horizontally.
AM loop antenna
3
For models with a voltage selector,
set VOLTAGE SELECTOR to
position of your local power line
voltage.
VOLTAGE SELECTOR
220-240V
110-120V
4
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press
system turns on and the demonstration
automatically ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from
the plug (only for model equipped with
an adaptor).
To connect optional components
See page 37.
To deactivate the demonstration
When you set the time (see "Step 2: Setting
the time"), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY (for MHC-RXD5/
R550) or DEMO (STANDBY) (for
MHC-GRX30/GRX30J) while the system is
off.
, the
continued
GB
5