Optional components
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting. Refer to the
instructions of each component.
Connecting an MD deck
for digital recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
Optical Cover Holder
Tip
Keep the optical cover at the slot provided.
Connecting an MD deck
for analog recording
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until "MD" appears.
To the audio output
of the MD deck
Tip
When you connect a Sony MD deck, you can use the
MD (, P, and p buttons on this unit's remote to
perform play, pause, and stop operations.
Note
If you cannot select "MD" even when you have
pressed FUNCTION, press
down FUNCTION when the power is turned off.
"VIDEO" will be switched to "MD". To return to
"VIDEO" do the same procedure.
To the audio input
of the MD deck
while holding
continued
GB
37