CAME G2500N Manuel D'installation page 30

ELECTRICAL CONNECTIONS AND PROGRAMMING
⚠ Warning! Before working on the control panel, cut off the main current supply and, if present, remove any batteries.
The control panel is powered at 230 V AC.
The control devices arepowered at 24 V AC.
Use DIP switches to set functions and the trimmer for adjustments.
All connections are quick-fuse protected.
FUSE TABLE
- Line
- Accessories
Description of parts
1. Transformer
2. TL trimmer for adjusting the operating time
3. TCA trimmer for adjusting the automatic closing
4. Radio-frequency card slot
5. Connection terminals
6. Transformer terminals
7. Antenna connection terminals
6
9
8
ZC5
5 A-F
1 A-F
1
12
10
2
3
7
5
8. Line fuse
9. Accessories fuse
10. Code-memorizing button
11. Function-selector dip-switch
12. Condenser
11
4
N.B.: Fixed motor torque: keep the
shown faston set to position 4.