Publicité
Les langues disponibles
Les langues disponibles
Routine Maintenance
3. Clean the mop pad with water only and leave to air dry before
re-installing.
Note:
· Remove the pad from the mopping module before cleaning it, and make sure dirty
water does not flow back into the water outlet to avoid clogging.
4. If slow water flow occurs, or the outflow is not well-distributed,
please clean the air hole in the cover of the water tank.
Clean the Main Brush
1. Press the brush guard clips inwards to remove the brush guard
and lift the brush out of the robot.
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
2. Pull out the brush cover as shown in the diagram. Use the
included cleaning tool to remove any hairs tangled in the brush.
Note: Do not pull out the hair tangled in the main brush excessively. Otherwise,
the brush may be damaged.
EN
15
Publicité
