Dreame DreameBot D10s Pro Manuel D'utilisation page 15

Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the
following table for routine maintenance.
Maintenance
Part
Frequency
Mop pad After each use
Main brush
Dust bin filter Once every 2 weeks
Side brush
Charging dock's
signaling area
Charging contacts
Universal wheel
Once every month
Laser Distance
Sensor (LDS)
AI visual sensor
Cliff sensors
Water tank
Clean it as needed
Dust bin
Note: The replacement frequency will depend on your usage of the robot. If an exception
occurs due to special circumstances, the parts should be replaced.
Clean the Dust Bin and Filter
1. Open the robot cover and press the bin clip to remove the dust bin.
Replacement Period
Every 3 to 6 months
Every 6 to 12 months
Every 3 to 6 months
/
2. Open the bin cover and empty the bin as shown in the diagram.
/
EN
13