Ribimex Ribiland PREHLS71T/VEN Manuel D'instructions Et D'utilisation page 29

4.2.3- Mounting the table (Fig.5)
- Depending on the size of the wood to be cut, the table (A) can be mounted at different heights.
Locking levers (C) are available at each installation level.
4.2.4- Installation of the switch (Fig.6)
- Fit the switch (C) to the plate (B) with 4 M4X60 (D) crosshead bolts and 4 M4 nuts.
Fig. 2
Fig. 5
4.2.5- Mounting the right and left storage trays (Fig.7)
- The left storage tray (A) must be mounted according to the instruction in Fig.6 and secured
with 2 lock nuts M8 (B).
- Repeat the same operation for the right storage tray.
Fig. 3
Fig. 7
Fig. 4
Fig. 6
Page 29 / 55