Publicité
Starting a seam
Place fabric under presser foot 1/2 inch
(12mm) from rear of fabricoAlign the right edge
with one of the seam guidelines on the needle
plate. Lowerthe presserfoot.
Backstitch to the edge of the fabric for
reinforcement by pushing in the reverse butfon
located in center of the stitch length olol, Hold
butfon in until stitching reaches edge of fabrico
Release push butfon for forward stitching.
Guidingand
supporting fabric
• For tricot, and other similar synthetic knits,
apply gentle tension by holding the fabric at
the front and back of presserfoot as vou sew.
Do not pull fabrico
• Forelasticated fabric, stretch lace, and knits
with an unusual amount of elasticity, hold the
fabric firmily in front and back of the presser
foot to stretch the seam as the stitches are
being placed.
30
Publicité
