Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION OF THE INTERFACE
Main Interface
Subinterface
Manual control
This interface is used to control the current luminaire and automatically enters the host state
(does not receive the DMX signal and sends a DMX signal to the slave to the host).
The manual menu will display 16 or 20 channels according to the selection made by the user in the
settings menu.
Option
1CH. Pan
......
15CH. Frost
16CH. Reset
17CH. Pan/Tilt Speed
18CH. Color Wheel Speed
19CH. Dimmer-Prism- Frost Speed
20CH. Gobo Wheel Speed
SETTINGS
EN
4
Description
0-255
The yellow arrow means that the menu item
is selected. Press OK button to enter into Edit
0-255
status. The selected item turns red. Press the
0-255
UP/DOWN buttons to select the desired value.
Press OK to save your setting and leave the Edit
status.
Press "OK" to display the confirmation dialog
box, press "OK" again to enter the reset inter-
face. All motors will reset
0-255
If the extended 20-channel mode is selected
0-255
0-255
0-255
© Copyright LOTRONIC 2019
Publicité
Table des Matières
