afx light BEAM100-LED Manuel D'utilisation page 5

Option
Operating Mode
DMX Address
Channel Mode
Invert Pan
Invert Tilt
Pan-Tilt Swap
Pan-Tilt Encoder
DMX Signal
Linear Color
Load Default
PHOTOMETRIC DIAGRAM:
SYSTEM
Description
DMX Slave status: Receive DMX signals from the controller or
Master unit
AUTO 1 Auto run;
AUTO 2 Master status: Auto run and send DMX signal to slave
Random
Sound
001-512 Press "OK" to enter into edit status. Then press UP/DOWN
to change the DMX address. Press "OK" to save and exit
edit status.
16 CH Standard 16 Channel Mode, 17-20CH No Function
20 CH Extended 20 Channel Mode, 17-20CH for speed control.
(please check the details on the Channel table)
OFF ON for starting and ending, the default setting is OFF.
ON
OFF ON for starting and ending, the default setting is OFF.
ON
OFF
ON Exchange Pan/Tilt channel (include Pan/Tilt Fine)
ON Use encoder (optocoupler) to determine if the unit is out of
step and automatically correct the position
OFF Correct position without encoder (optocoupler)
KEEP Continue running as it is now
CLEAR All motors return to their position and stop running.
ON Linear color change
OFF Nonlinear color change, half color change
Press the "OK" button to display the confirmation dialog,
press "OK" again.
The key restores the default settings
www.afx-light.com
5 EN