Télécharger Imprimer la page

Publicité

Liens rapides

OUTSIDE
SHED
MODEL 60387
BEFORE ASSEMBLY:
• Assemble on a level platform
• At least 3 people recommended for setup
• Inspect all parts and hardware. Ensure all are
included using the Parts Identifier in the middle
of these instructions. The Parts Identifier , in
yellow, can be removed from the instructions for
quick reference
WATCH THE HOW-TO ON YOUTUBE
Scan the code, or visit go.lifetime.com/60387-fullassembly
®
YouTube
and the YouTube logo are trademarks of Google, LLC.
THIS ITEM IS INTENDED FOR OUTDOOR DOMESTIC USE ONLY! NOT FOR
COMMERCIAL USE.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
TOOLS REQUIRED
(Not included—unless otherwise indicated*)
QUESTIONS?
Call: 1-800-225-3865
(English, French, Spanish)
3/8 in/po
(≈10 mm)
AIW (x1)*
CONTACT LIFETIME CUSTOMER SERVICE:
Live Chat:
www.lifetime.com/customerservice/home
(click on "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
ADC (x1)*
5/16 in/po (≈8 mm) Drill Bit
5/16 in/po (≈8 mm) Masonry Drill Bit
GHO 5/32 in/po (≈4 mm) Drill Bit (*)
For Customer Service in mainland
Europe and the United Kingdom:
E-mail: csinternational@lifetime.com
TABLE OF CONTENTS
Icon Legend..................................................4
Warnings & Notices......................................5
Platform Construction...................................6
Door Assembly.............................................11
Floor Assembly............................................26
Wall Assembly.............................................29
Transom & Gable Assembly........................35
Shelving Installation...................................49
Parts Identifi er...........................................i–iv
Roof Assembly............................................52
Wall Hook Installation................................84
Door Alignment.........................................86
Shed Anchoring.........................................88
Cleaning & Care.......................................94
Registration............................................95
Warranty.................................................96
Model Number: 60387
Product ID:

Publicité

loading

Sommaire des Matières pour Lifetime 60387

  • Page 1 The Parts Identifier , in yellow, can be removed from the instructions for quick reference WATCH THE HOW-TO ON YOUTUBE Scan the code, or visit go.lifetime.com/60387-fullassembly ® YouTube and the YouTube logo are trademarks of Google, LLC.
  • Page 2 Il est posssible enlever l’ Identificateur de pièces , en jaune, des instructions pour référence rapide REGARDER LA VIDÉO SUR YOUTUBE Scanner le code, ou visiter go.lifetime.com/60387-fullassembly YouTube ® et le logotype YouTube sont des marques déposées de Google, LLC.
  • Page 3 AIW (x1)* GHO 5/32 in (≈4 mm) Broca (*) Número de pieza: 60387 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Chat en vivo: Llamar : 1-800-225-3865 Para el servicio a clientes en el continente europeo: Correo electrónico:...
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts required for a section. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6 PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS / CONCRETO REQUERIDO 1 yd (≈0,77 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON / PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (≈10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 100"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS / MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS / PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 100" x 65" (≈2,54 m x ≈1,65 m).
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS/ INSTRUMENTAL, PIEZAS, Y ACCESORIOS REQUERIDOS 2" x 4" x 55" (≈5,1 cm x ≈10,2 cm x ≈1,38 m) (x7) 2"...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS / INSTRUMENTAL, PIEZAS, Y ACCESORIOS REQUERIDOS 10” x 93 1/2” x 3/4” (≈25,4 cm x ≈2,38 m x ≈19,1 mm) (x1) 48”...
  • Page 11 LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLAJE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ACH (x2) DSG (x1) DSR (x1) AEB (x2) BYZ (x2) Upper / Supérieur / Superior Lower / Inférieur / Inferior ADW (x1) ENO (x4) BYR (x1)
  • Page 12 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section2 • Slide a square tube (EDW) into the square hole at the bottom of the left door (BDJ) until about 6" (≈15 cm) of the tube hang out of the hole.
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ACH (x2) AEB (x2) AAB (x2) EOY (x1) • Attach the door latch bracket (EOY) to the door using the hardware indicated. Only hand-tighten for now. •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ENO (x4) DSG(x1) DSR (x1) Upper / Supérieur / Superior Lower / Inférieur / Inferior ENP (x2) •...
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) ADW (x1) AEE (x3) BYR (x1) BYS (x1) • Attach the front and rear handle pieces (BYS and BYR) together. Secure the handle to the door using the hardware indicated. •...
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a hinge tube (FVW) into the hole at the bottom of the door. If necessary, use a rubber mallet to gently tap the tube into place. This tube has a hole at both ends.
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each door. Starting at the top, left corner of the groove in the left door, lay the butyl tape (EPH) into the groove.
  • Page 18 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Align the holes in the pane with those in the door, and gently set a window pane (DHN) down onto the Door. •...
  • Page 19 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLAJE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Parts / Pièces / Piezas BYZ (x2) ACH (x2) EOZ (x1) ADW (x1) EPA (x1) CHK (x1) CXK (x2) AEB (x2) AAB (x2)
  • Page 20 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section3 • Slide a square tube (EDW) into the square hole at the bottom of the right door (BDK) until about 6" (≈15 cm) of the tube hang out of the hole.
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADC (x1)* CHK (x1) • Flip the door over. Using the 5/32" (≈4 mm) drill bit (GHO) included and an electric drill, drill through the divot near the bottom edge of the door and into the square tube.
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) 3/8 in/po EPC (x2) (≈10 mm) CXK (x2) ACH (x2) AEE (x2) AAB (x2) AEB (x2) •...
  • Page 23 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) ADW (x1) AEE (x1) • Attach the handle as shown. Tighten securely. • Attacher la poignée comme affi ché. Bien serrer. •...
  • Page 24 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a hinge tube (FVW) into the hole at the bottom of the door until a few inches remain out of the bottom. If necessary, use a rubber mallet to gently tap the tube into place.
  • Page 25 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each door. Starting at the top, right corner of the groove in the right door, lay the butyl tape (EPH) into the groove.
  • Page 26 FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLAJE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO AHO (x2) CWU (x6) These are not anchoring screws. Their purpose is to fasten together the fl oor panels. Ces vis ne sont pas de vis d’ancrage. Leur but est pour attacher les panneaux de plancher. Estos no son tornillos de anclaje.
  • Page 27 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section4 • Slide the tabs along the edge of an outer fl oor panel (CUW) underneath the other outer fl oor panel (CUW). The tabs interlock.
  • Page 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS CWU (x6) • Insert the screws (CWU) through the divots in the fl oor panels and into the tabs of the adjacent fl oor panels. (The divots are near the seams of the fl...
  • Page 29 WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLAJE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section. * No se utilizará...
  • Page 30 • En cas d’avoir des problèmes avec cette section, scanner le code QR en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section5 • At the bottom of the back of each wall panel is a three-letter ID (AHD, AGN, AGW or AGY).
  • Page 31 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Secure a wall support channel (AFM) to the corner wall panel (AGY) using four (4) screws (ADZ). The end with two holes goes at the top. •...
  • Page 32 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Insert the two left-most tabs at the bottom of the corner panel (AGY) into the two right-most slots along the edge of the fl...
  • Page 33 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) • Secure the two panel • Slide a wall panel (AHD) into place. together using fi...
  • Page 34 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) 5.11 5.12 • Insert this corner panel (AGL) like the fi rst corner wall •...
  • Page 35 TRANSOM & GABLE ASSEMBLY / ASSEMBLAGE DE L’IMPOSTE ET DES PIGNONS / ENSAMBLAJE DEL MONTANTE Y DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO AEE (x8) ADX (x8) AHP (x2) ADZ (x84) GKF (x2) GIF (x1) GIE (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS CONTENTS OF SMALL PARTS KIT / CONTENU DE LA TROUSSE DE PETITES PIÈCES / CONTENIDO DEL KIT DE PIEZAS PEQUEÑAS FWC (x2)
  • Page 36 TRANSOM & GABLE ASSEMBLY / ASSEMBLAGE DE L’IMPOSTE ET DES PIGNONS / ENSAMBLAJE DEL MONTANTE Y DE LAS FACHADAS PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique / Piezas de plástico GDV (x1) GDU (x1) GDT (x1) GDW (x1) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 37 • En cas d’avoir des problèmes avec cette section, scanner le code QR en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section6 TRANSOM ASSEMBLY / ASSEMBLAGE DE L’IMPOSTE...
  • Page 38 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x24) • Peel the protective fi lm from both sides of the two (2) transom window panes (FWC). Secure the window panes to the transom (GDT) using twelve (12) screws (ADZ) each.
  • Page 39 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS • There is a narrow groove (illustrated in black) running along the outside of the windows on the gable. Starting at the top, left corner of the groove in the left gable window (GDU), lay the butyl tape (EPI) into the groove.
  • Page 40 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) ADZ (x8) AEE (x4) GKF (x1) GIE (x1) • Secure the window panes to the left gable (GDU) using eight (8) screws (ADZ) each. Do not overtighten the hardware. The curved side of the window should be oriented toward the end of the panel.
  • Page 41 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) ADZ (x8) AEE (x4) GKF (x1) GIF (x1) • Repeat steps 6.3–6.5 for the right gable (GDV). The indented corner of the window pane must be oriented to the left-upper corner of the window. •...
  • Page 42 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Set the rear wall extension (GDW) on the rear wall panels. Slide the tabs toward the inside of the walls.
  • Page 43 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Fold the right gable assmebly as shown below. • Plier l’assemblage du pignon droit comme indiqué...
  • Page 44 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) 6.11 • Secure the gable to the right wall using fi fteen (15) screws (ADZ). Do not overtighten •...
  • Page 45 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) 6.12 • Complete steps 6.9 - 6.11 to attach the left-side gable. • Compléter les étapes 6.9 - 6.11 pour fi xer le pignon du côté gauche. •...
  • Page 46 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) 6.13 • Pull the hinge tube down out of the left door (the door with hinge tube (FVW), the longest of the tubes) about six inches. Align the hole at the bottom of the hinge tube with the slit in the bushing, and insert the tube.
  • Page 47 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 6.14 • Slide the holes in the front transom down over the two hinge tubes in the doors. There are holes on the underside of the transom that will be fi...
  • Page 48 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 6.15 • Attach both sides of the transom to the left and right gables with the hardware indicated. •...
  • Page 49 SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO * Not all hardware will be used in the section. *La quincaillerie n’est pas utilisée au complet dans la section. *No se utilizará todo el herraje en la sección. ADZ (x14)* Parts / Pièces / Piezas AIY (x2)
  • Page 50 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section7 • Insert the shelf brackets (AIY) into the slots in the wall support channels. The brackets must be at the same height.
  • Page 51 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOITE 1 CONTENIDO DE LA CAJA 1 CUW (x2) GDU (x1) GDV (x1) GDW (x1) GDT (x1) AFV (x1) FYG (x4)
  • Page 52 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS METAL KIT 1 / CONTENU DE LA TROUSSE DE PIÈCES EN MÉTAL 1 CONTENIDO DEL KIT DE PIEZAS DE METAL 1 AFM (x6) EDW (x2) FVT (x1) FVW (x2) FVV (x3) CONTENTS OF BOX 2 / CONTENU DE LA BOITE 2...
  • Page 53 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF SMALL PARTS KIT / CONTENU DE LA TROUSSE DE PETITES PIÈCES CONTENIDO DEL KIT DE PIEZAS PEQUEÑAS GKX (x8) FVR (x1) FVS (x2) FWB (x2) DHN (x2) EDL (x6) FWC (x2) AIX (x1) EPH (x4)
  • Page 54 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS THIS PAGE INTENTIONALLY LEFT BLANK CETTE LPAGE A ÉTÉ INTENTIONNELLEMENT LAISSÉE EN BLANC ESTA PÁGINA SE HA DEJADO EN BLANCO INTENCIONADAMENTE...
  • Page 55 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Fold the fl aps on the ends of the shelf (AFV) up, and set the shelf onto the brackets. The notches along the long edge should be against the rear wall.
  • Page 56 ROOF ASSEMBLY / MONTAGE DU TOIT / ENSAMBLAJE DEL TECHO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO GJZ (x64) ADV (x10) FEX (x61) ADX (x4) EYR (x2) AEE (x2) ACB (x6) ADK (x2) HDZ (x2) AHS (x2) Parts / Pièces / Piezas GLB (x6) HDX (x2) HDW (x4)
  • Page 57 ROOF ASSEMBLY / MONTAGE DU TOIT / ENSAMBLAJE DEL TECHO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal / Piezas de metal FVV (x3) FVT (x1) Metal Parts / Pièces en métal / Piezas de metal FVR (x1) FVS (x2) GKX (x8)
  • Page 58 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section8 • Snap fourteen (14) anchors (FEX) in the direction shown into only the slots indicated in this roof panel (FYG). DO NOT REPEAT this step for the other three (3) roof panels.
  • Page 59 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS FEX (x28) • Snap fourteen (14) anchors (FEX) in the direction shown into only the slots indicated in this roof panel (FYG). Complete this step for the second and third panels only.
  • Page 60 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS FEX (x14) • Snap fourteen (14) anchors (FEX) in the direction shown into only the slots indicated in this roof panel (FYG). •...
  • Page 61 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Snap two (2) roof support tubes (GKX) into the recesses on the underside of the roof panel. Repeat this step for the remaining three (3) roof panels.
  • Page 62 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x3) • Place a gutter channel (FVV) on the right side of the fi rst roof panel (FYG). Secure the gutter channel at the middle three (3) screw anchors with the hardware indicated.
  • Page 63 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • To insert one (1) gutter channel cover (GLB) into each end of a gutter channel, slightly tilt the cover upon insertion. Press it over the channel but under the roof panel.
  • Page 64 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x7) • Attach the front of the fi rst roof panel with the hardware indicated. •...
  • Page 65 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x5) 8.10 • Attach the back of the fi rst roof panel with the hardware indicated. •...
  • Page 66 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GLB (x2) 8.12 • Using two (2) adults, place the second roof panel onto the gutter channel of the fi rst roof panel. Add two (2) gutter channel covers at each end of the second roof panel.
  • Page 67 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x5) 8.13 • Attach the front of the second roof panel with the hardware indicated. •...
  • Page 68 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x5) 8.15 • Attach the back of the second roof panel with the hardware indicated. •...
  • Page 69 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GLB (x2) 8.17 • Using two (2) adults, place the third roof panel onto the gutter channel of the second roof panel. Add two (2) gutter channel covers at each end of the second roof panel.Line up the gutter channel of the third roof panel into the carve-outs in the shed.
  • Page 70 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x5) 8.18 • Attach the front of the third roof panel with the hardware indicated. •...
  • Page 71 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x2) 8.20 • Attach the back of the third roof panel with the hardware indicated. •...
  • Page 72 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x12) 8.22 • Attach the fourth roof panel with the hardware indicated. • Fixer le quatrième panneau de toit avec la quincaillerie indiquée. •...
  • Page 73 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x12) 8.23 • Attach the gutter channel covers (GLB) at the front of the shed with the hardware indicated. •...
  • Page 74 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GHO 5/32 in/po (≈4 mm)* 8.25 • Use the 5/32” (5 mm) drill bit to drill through the transom divots and into the hinge tubes. Do not drill all the way through the tubes and out the transom.
  • Page 75 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS FEX (x5) 8.26 • Insert an anchor (FEX) into the transom at the fi ve (5) locations shown. •...
  • Page 76 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ACB (x2) 8.27 • Using two people, place the upper header (FVT) near the top of roof panels and attach the upper header in the locations where the holes were drilled into the upper transom with the hardware indicated.
  • Page 77 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x2) 8.28 • Place the two-way square plugs (HDX) into both ends of the lower shed header (FVR). Use a mallet if necessary. •...
  • Page 78 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) 8.31 • Using a drill, place four (4) screws in the locations shown in the lower header. The screws will go through the two- way square plug.
  • Page 79 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS EYR (x2) AEE (x2) 8.32 • Open the doors at the front of the shed. Screw in the hardware indicated into the bottom of the front of the transom through the divots located there.
  • Page 80 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 8.33 • Place the lower header onto the two (2) screws and washers that were placed in the last step. Be sure the screws in the lower header are facing away from the transom.
  • Page 81 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x2) ADV (x1) HDZ (x1) 8.34 • Attach the lower header to the transom by placing two (2) cap nuts (ADK) over the two (2) screws that protrude through the lower header.
  • Page 82 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x3) HDZ (x1) 8.36 • Secure the middle section of the lower header using the hardware indicated. Do not place any hardware into the center hole at this time.
  • Page 83 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 8.38 • Place the vertical brace (FWM) in between the lower and upper header. It will sit in the middle of the headers. •...
  • Page 84 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) 8.39 • Attach the vertical brace (FWM) against the upper and lower headers using the hardware indicated. •...
  • Page 85 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ACB (x4) ADV (x6) 8.41 • Using two (2) adults, attach the upper header (FVT) on the left side using the hardware indicated. •...
  • Page 86 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) 8.43 • Install the left (AIC) and right (AIM) gap fl aps using the hardware indicated. The fl aps slide under the transom and serve to block out light.
  • Page 87 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 8.44 • Install four (4) truss slot covers (HDW) on both sides and the rear of the shed. •...
  • Page 88 WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS MURAUX / INSTALACIÓN DE LOS GANCHOS MURALES ACCESSORIES REQUIRED / ACCESSOIRES REQUIS / ACCESORIOS REQUERIDOS EDL (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless otherwise indicated*) / (Non inclus —...
  • Page 89 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section9 • Insert the six (6) wall hooks (EDL) into any of the notches in the wall panels (any wall of the shed). Then push downward to lock them in place.
  • Page 90 DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique / Piezas de plástico AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless otherwise indicated*) / (Non inclus —...
  • Page 91 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16" (≈11 mm) 10.1 • If the Doors are not level, follow the steps below to even them out. •...
  • Page 92 SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless otherwise indicated*) / (Non inclus — sauf indication contraire*) / (No incluido, salvo indicación contratia*) 5/16 in/po (≈8 mm) Wood Drill Bit Foret à...
  • Page 93 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) / SECCIÓN 11 (CONTINUACIÓN) FOR A CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON PARA UNA PLATAFORMA DE CONCRETO 5/16 in/po (≈8 mm) 11.1 • If you plan on anchoring your shed to a concrete platform, you must purchase the correct anchoring hardware. We recommend using a hammer drill, 5/16"...
  • Page 94 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) / SECCIÓN 11 (CONTINUACIÓN) FOR A WOOD PLATFORM / POUR UNE PLATE-FORME EN BOIS PARA UNA PLATAFORMA DE MADERA 5/16 in/po (≈8 mm) 11.1 • If you plan on anchoring your shed to a wood platform, you must purchase the correct anchoring hardware. We recommend using a drill, 5/16"...
  • Page 95 NOTES / REMARQUES / NOTAS...
  • Page 96 NOTES / REMARQUES / NOTAS...
  • Page 97 NOTES / REMARQUES / NOTAS...
  • Page 98 ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 99 à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 100 THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE. Lifetime Lawn and Garden products are warranted to the original purchaser to be free from defects in material or imperfections that impair the use of the product. Defects resulting from misuse, abuse or negligence will void this warranty.
  • Page 101 Cette garantie n’est pas transférable et se limite expressément à la réparation ou au remplacement d’un produit défectueux. Si le produit est défectueux au sens de cette garantie, Lifetime Products, Inc. réparera ou remplacera les pièces défectueuses sans frais pour l’acheteur. Les frais d’expédition en partance ou en provenance de l’usine et les autres frais liés au retrait, à...
  • Page 102 NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor.
  • Page 103 IMPORT INFORMATION / IMPORTATIONS / INFORMACIÓN DE IMPORTACIONES Distributed by: Costco Wholesale Korea, Ltd. 40, Iljik-ro Costco Wholesale Corporation Gwangmyeong-si P.O. Box 34535 Gyeonggi-do, 14347, Korea Seattle, WA 98124-1535 1899-9900 1-800-774-2678 www.costco.co.kr www.costco.com Importado por: Importadora Primex S.A. de C.V. Costco Wholesale Canada Ltd.* Blvd.
  • Page 104 Pour acheter des accessoires ou des autres produits Lifetime , visiter le : www.lifetime.com Ou composer le 1-800-424-3865 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al 1-800-424-3865 www.lifetime.com 1233504 11/9/2023...