Lifetime 60318 Instructions D'assemblage
  1. Manuels
  2. Marques
  3. Lifetime Manuels
  4. Rangement extérieur
  5. 60318
  6. Instructions d'assemblage

Lifetime 60318 Instructions D'assemblage

Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
15' x 8'
STORAGE SHED
MODEL 60318
BEFORE ASSEMBLY:
• Assemble on a level surface
• At least 3 people recommended for setup
TOOLS REQUIRED
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
Live Chat: www.lifetime.com
(click on "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
5/16" (8 mm) Wood Drill Bit
5/16" (8 mm) Masonry Drill Bit
MODEL# AND PRODUCT ID
Model Number: 60318
Product ID:
TABLE OF CONTENTS
Icon Legend................................4
Warnings & Notices.....................5
Platform Construction.................6
Truss Assembly.........................11
Gable Assembly........................18
Door Assembly..........................24
Floor Assembly..........................35
Wall Assembly..........................39
Parts Identifi er..........................49
Shelving Installation..................54
Roof Assembly..........................58
Window Installation...................80
Shutter Installation...................83
Wall Hook Installation................86
Door Alignment.........................88
Anchoring................................90
Cleaning & Care.........................95
Registration...........................96
Warranty................................97
(both are needed when contacting us)

Publicité

Table des Matières
loading

Manuels Connexes pour Lifetime 60318

Sommaire des Matières pour Lifetime 60318

  • Page 1: Table Des Matières

    Anchoring........90 5/16" (8 mm) Masonry Drill Bit Cleaning & Care......95 Registration......96 Warranty........97 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Live Chat: www.lifetime.com MODEL# AND PRODUCT ID Call: 1-800-225-3865 (both are needed when contacting us) (click on “LIVE CHAT” tab) Model Number: 60318 7:00 am–5:00 pm (Monday–Friday) MST...

  • Page 2: Instructions D'assemblage

    Nettoyage et entretien....95 Enregistrement......96 Garantie.......98 ® QUESTIONS ? CONTACTER LES SERVICES À LA CLIENTÈLE LIFETIME t’Chat en direct: www.lifetime.com N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT Composer le 1-800-225-3865 (il faut avoir les deux au moment de nous contacter) (cliquer sur la languette « LIVE CHAT ») N°...

  • Page 3: Instrucciones De Ensamble

    Limpieza y cuidado......95 Registro........96 Garantía.......99 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: www.lifetime.com MODEL E ID DEL PRODUCTO Marcar : 1-800-225-3865 (se necesitan los dos al contactarnos) (cliquear en la lengüeta «LIVE CHAT») Número de modelo: 60318...

  • Page 4: Icon Legend

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts to be used for a section. •...

  • Page 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...

  • Page 6: Platform Construction

    PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS CONCRETO REQUERIDO 2 yd (1,53 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 180"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 180" x 96"...
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA 2 in/po x 4 in/po x 178 in/po (5,1 cm x 10,2 cm x 4,52 m) (x2) 2 in/po x 4 in/po x 90 1/2 in/po (5,1 cm x 10,2 cm x 2,30 m) (x13) 16d 3 in/po (16d x 7,62 cm) (x52) 1.2.1 •...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA 34 in/po x 93 1/2 in/po x 3/4 in/po (86,4 cm x 2,38 m x 19,1 mm) (x1) 48 in/po x 93 1/2 in/po x 3/4 in/po (1,22 m x 2,38 m x 19,1 mm) (x3) 8d 1 1/2 in/po (8d 3,81 cm) (x72) 3/8 in/po (10 mm)

  • Page 11: Truss Assembly

    TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje CXK (x2) DTK (x22) ADY (x19) ADK (x40) ADJ (10) AHT (x1) DTJ (x1) 11 9/16 in/po (29,4 cm) ADH (x5)

  • Page 12: Outils Et Quincaillerie Requis

    SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) ADK (x8) DTK (x8) SIDE TRUSSES (x2) / FERMES LATÉRALES (x2) CERCHAS LATERALES (x2) •...
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADY (x8) ADK (x8) 7/16 in/po (x2) (11 mm) (x2) 11 9/16 in/po (29,4 cm) ADH (x2) ADJ (x4) ADY (x2)
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADJ (x4) 7/16 in/po (x2) (11 mm) (x2) DTK (x8) 3/8 in/po (x2) (10 mm) (x2) ADY (x8) 11 9/16 in/po (29,4 cm) ADK (x16) ADH (x2)
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) DTK (x4) ADK (x6) ADY (x2) DTK (x4) • Attach a Connector (AIP) to the end of two Truss Gutter Channels using the hardware provided.
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (10 mm) (x2) DTK (x2) ADK (x1) DTJ (x1) CXK (x2) 2.11 • Attach the Vertical Truss Brace (DSN) to the Truss. Only fi nger tighten this Nut (ADK) for now. •...
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (11 mm) (x2) ADJ (x2) 3/8 in/po (x2) AHT (x1) (10 mm) (x2) 11 9/16 in/po (29,4 cm) ADH (x1) ADK (x1) ADY (x1)

  • Page 18: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIQ (x2) ENH (x2) ADV (x10) EYR (x4) ADW (x10) AEE (x16) ADZ (x9) AHS (x4) EYQ (x3)

  • Page 19: Tools And Parts Required

    SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Align the holes in the Left (AGH) and Right (AGI) Side Gable Halves. • Aligner les trous dans les pignons latéraux gauche (AGH) et droit (AGI). •...
  • Page 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10 mm EYQ (x1) ADW (x5) ADZ (x3) AHS (x2) CXK (x1) AEE (x5) • Secure with the hardware provided. •...
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10 mm ADV (x4) EYR (x2) ADK (x2) AEE (x2) • Align the holes in the Header with those in the Entry Gable. •...
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x5) ADZ (x2) AEE (x7) AHS (x2) CXK (x2) EYQ (x2) 3.11 3.12 • Secure with the hardware included. •...
  • Page 23 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADK (x2) ADV (x6) EYR (x2) AEE (x2) 3.15 • Align the holes in the Header with those in the Gable. •...

  • Page 24: Door Assembly

    LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x2) BYZ (x4) ADJ (x4) AEE (x6) AEB (x4) ABU (x4) BYS (x2)
  • Page 25 Sans Encoche Sin Muesca http://go.lifetime.com/ldslidelatch • Door Channels (BLH) are specifi cally designed to bow. This ensures a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ). When the door handle is gently closed and latched, there should be a slight pressure sealing the doors and eliminating any gaps.
  • Page 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHM (x2) BYR (x1) BYS (x1) • Set the Deadbolts (AHM) down into the recesses at the top and bottom of the Door. Then, slide the Door End Channel (BLH) over the edge of the Door and the bottom of the Deadbolts as indicated.
  • Page 27 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) (11 mm) ABU (x2) ADW (x1) ECY (x1) ADJ (x2) ECX (x1) AEB (x2) AEE (x3) •...
  • Page 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Door. Starting at the top, left corner of the groove in the Left Door, lay the 1/8”...
  • Page 29 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) BYR (x1) 7/16 in/po ABU (x2) (11 mm) BYS (x1) AHM (x2) ADW (x1) ECY (x1) ECX (x1) ADJ (x2) AEB (x2)
  • Page 30 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje BYS (x2) AEB (x2) BYR (x2) ADW (x2) AEE (x2) ECW (x2) BYZ (x4)
  • Page 31 • Door Channels (BLH) are bowed by design, ensuring a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ).
  • Page 32 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) (11 mm) AEE (x1) BBI (x1) ADJ (x2) ADW (x1) AEB (x2) ECW (x1) ABU (x2) ECZ (x1) EDA (x1)
  • Page 33 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Door. Starting at the top, right corner of the groove in the Right Door, lay the 1/8"...
  • Page 34 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) BYR (x1) (11 mm) ADW (x1) AEB (x2) BYS (x1) EPH (x1) ADZ (x14) ABU (x2) ECZ (x1) ECW (x1)

  • Page 35: Floor Assembly

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADC (x1) AHO (x1) BQC (x30) Note: These are not anchoring screws. Their purpose is to fasten together the Floor Panels. Remarque : Ces vis ne sont pas de vis d’ancrage.
  • Page 36 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an Inner Floor Panel (CUD) at an angle and slide the tabs along the edge underneath an Outer Floor Panel (CUW).
  • Page 37 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHO (x1) • Repeat the last step. • Attach an Outer Floor Panel (CUW) to the Inner Floor •...
  • Page 38 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x30) • Insert the Screws (BQC) through the divots in the Floor Panels and into the tabs of the adjacent Floor Panels. (The divots are near the seams of the Floor Panels.) •...

  • Page 39: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x109) ADV (x8) AHO (x3) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...

  • Page 40: Tools And Parts Required

    SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x8) • Secure a Wall Support Channel (FLB) just to the left of the center groove of each of the two (2) Window Wall Panels (AHH) using four (4) Screws (ADV) for each.
  • Page 41 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) • Secure a Wall Support Channel (AFM) just to the left of the center groove of each of the seven (7) Wall Panels (AHD) using four (4) •...
  • Page 42 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Secure a Wall Support Channel (AFM) to the groove along the edge of the Corner Wall Panel (AGN) using four (4) Screws (ADZ).
  • Page 43 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Secure a Wall Support Channel (AFM) to the Left Narrow Wall Panel (CKK) using four (4) Screws (ADZ). The end with two holes goes at the bottom.
  • Page 44 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) • Insert the two tabs at the bottom of the Right • Slide the Panel to the left. Narrow Wall Panel (CKN) into the 7th and 8th slots •...
  • Page 45 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • You may install the Side Doors on either end; however, you will need to install the Corner Panels (AGN & AGY) on the same end as you do the Doors.
  • Page 46 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) 7.12 • Slide the Panel to the front of the Floor as far as it will go. •...
  • Page 47 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x40) 7.14 • Insert the four tabs at the bottom of two (2) Wall Panels (AHD) into the next four slots along the edge of the Floor, and slide the Panels forward.
  • Page 48 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x10) AHO (x2) 7.17 7.18 • Insert this Corner Wall Panel (AGN) in the same way •...

  • Page 49: Parts Identifi Er

    PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 BDJ (x1) BDK (x1) BDS (x1) CUW (x2) AGQ (x4) DRA (x1) CUD (x2) BDR (x1) METAL PARTS KIT 1 / KIT PIÈCES EN MÉTAL 1 KIT DE PIEZAS DE METAL 1...
  • Page 50 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS METAL PARTS KIT 1 / KIT PIÈCES EN MÉTAL 1 KIT DE PIEZAS DE METAL 1 67 3/4 in/po (1,72 m) AFM (x7) 79 1/2 in/po (2,02 m) CRD (x2) 75 1/2 in/po (1,92 m) BLH (x2) METAL PARTS KIT 2 /...
  • Page 51 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 AFY (117) (x2) AGL (x1) AGY (x1) AGN (x1) AHD (x7) AGW (x1) AHH (x2) CKK (x1) CKN (x1) FTM (x1)
  • Page 52 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 3 / CONTENU DE LA BOÎTE 3 CONTENIDO DE LA CAJA 3 BDJ (x1) BDK (x1) AFV (x1) EVZ (x1) EWA (x1) CUD (x2) AGH (x1) AFY (x3) AGI (x1) AGQ (x6) 52 52...
  • Page 53 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) AHO (x1) 7.21 • Attach the Left Narrow Wall Panel (CKK) with fi ve (5) Screws (ADZ). •...

  • Page 54: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x2) ADZ (x14) ADZ (x8) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...

  • Page 55: Outils Et Quincaillerie Requis

    SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Choose how high you would like the Long Shelf to be by selecting the corresponding notches (there are fi ve) in the Wall Support Channels, and insert the two Shelf Brackets (AIY) into the slots in the Wall Support Channels.
  • Page 56 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Set the Shelf onto the Brackets. The notches along the long edge should be against the rear wall. •...
  • Page 57 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Select the corner in which you would like to install a Corner Shelf (AFZ). In this image, the shelf is shown above the Long Shelf.

  • Page 58: Roof Assembly

    ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AHL (X1) ADZ (x200) DTV (x2) AIC (x1) AIM (x1) AHP (x4) AEE (x2) CXK (x2) ADX (x42) AED (x36)
  • Page 59 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico (x1) (x1) BDK (x2) BDJ (x2) (x1) DRA (x1) BDR (x1) BDS (x1) AGQ (x10) AHC (x6) AFY (x5)
  • Page 60 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Attach the Side Gable to the Shed using fourteen (14) Screws (ADZ). • Attacher le pignon latéral à l’abri à l’aide de quatorze (14) vis (ADZ). •...
  • Page 61 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Set the Roof Panel (AGQ) down onto the Wall Panel, Gable, and Truss. The groove at the bottom of the Roof Panel sets over the top of the Wall Panel.
  • Page 62 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x7) • Insert the fi rst three (3) Screws (ADZ) through the Gable and the fi rst two (2) Screws (ADZ) through the Truss and into the Roof Panel at the locations shown.
  • Page 63 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x11) • Repeat these steps for the rear Roof Panel, but only use one Roof Support for each Roof Panel (AGQ). •...
  • Page 64 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) • Attach these Roof Panels (AGQ) in a similar manner as the previous Panels. Roof Panels in these locations only use ten (10) Screws (ADZ) each.
  • Page 65 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) 9.10 • Pull the Hinge Tube down out of the Left Door (the Door with Hinge Tube (CRD), the longest of the Tubes) about six inches.
  • Page 66 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 9.11 • Slide the holes in the Entry Gable down over the two Hinge Tubes. Secure with six (6) Screws (ADZ). •...
  • Page 67 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x42) 9.12 • Repeat steps 9.3–9.9 for the Panels on the opposite side. • Répéter les étapes 9.3 – 9.9 pour les panneaux sur le côté opposé. •...
  • Page 68 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 9.13 • Place the back of the Center Truss into the notch (Fig. 1) on the center rear Wall Panel. Then, lift the front of the Truss (Fig.
  • Page 69 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) DTV (x2) AEE (x2) CXK (x2) 9.14 • Secure the ends of the Support Tube to the Side Truss Channels using the hardware provided. •...
  • Page 70 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) 9.15 • Repeat step 9.10 for the Front Left and Right Doors. • Répéter l’étape 9.10 pour les porte gauche et droite avants. •...

  • Page 71: Tools And Parts Required

    SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 9.16 • Slide the holes in the Entry Gable down over the two Hinge Tubes. • Faire glisser les trous dans le pignon d’entrée sur les deux tubes. •...
  • Page 72 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x21) 9.17 • Set the end of the Center Truss onto the notch in the Front Gable as shown. •...
  • Page 73 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ECS (x1) BZA (x2) ADK (x2) AEE (x4) ECR (x1) 9.19 • Insert the Right Drainage Plate (ECS) into the Right Lateral Truss, and align the notch in the Plate with the fi rst hole in the Truss as shown.
  • Page 74 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADZ (x14) 9.21 • Fold the ends of the Large Angled Roof Panel (DRA) and set it down onto the shed as shown. Secure the Panel to the Entry Gable and Center Truss with twelve (12) Screws (ADZ) at the locations shown.
  • Page 75 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 9.23 • An adult must apply a downward pressure on Panel (DRB) while another inserts these Screws (ADZ). •...
  • Page 76 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x40) 9.25 • Starting on the right side, attach the Roof Caps (AGG, AFY, and AFW) to the Roof and Trusses using Screws (ADZ). •...
  • Page 77 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x36) AED (x36) 9.26 • Fold the Skylights (AHC), and attach them to the Roof using six (6) Screws (ADX) and Washers (AED) for each Skylight. •...
  • Page 78 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x2) AHL (X1) 9.27 • Attach the Left Door Strike Plate (AHL) to the Floor as shown. Do not overtighten. •...
  • Page 79 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIC (x1) ADX (x4) AIM (x1) 9.28 • Attach the Left (AIC) and Right (AIM) Gap Flaps to the corners of the Doors using the hardware included. These Flaps simply serve to block out light.

  • Page 80: Window Installation

    WINDOW PANE INSTALLATION / INSTALLATION DES CARREAUX / INSTALACIÓN DE LAS HOJAS DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADY (x2) ADZ (x8) AIS (x4) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 81 (AHE). Con el borde curvado hacia arriba y el interior, deslizar la hoja en su lugar. http://go.lifetime.com/8wininstall 10.2 • Insert a Screw (ADY) into the hole at the bottom of the Window Pane. This helps keep the Window Pane up when open.
  • Page 82 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) AIS (x4) 10.3 • Attach the two (2) Window Latches (ADY) at the top corners of the Panel opening. The Latch should move freely. Repeat steps 10.1–10.3 for the second Window Pane.

  • Page 83: Shutter Installation

    SHUTTER INSTALLATION / INSTALLATION DES VOLETS / INSTALACIÓN DE LAS CONTRAVENTANAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ARV (x16) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AYI (x4)
  • Page 84 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x1) 11.1 • There are four sets of two screw-location indicators. One by one, insert the Screws (ARV) through the indicators from the inside of the shed outward, and attach the Shutters (AYI) to the outside of the Wall Panels.
  • Page 85 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x7) 11.2 • Align the screw bosses in the Shutters (AYI) with the Screws (ARV) as you insert the Screws. Secure both Shutters to the Panels.

  • Page 86: Wall Hook Installation

    WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS / INSTALACIÓN DE LOS GANCHOS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje EDL (x12) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO 86 86...

  • Page 87: Outils Et Quincaillerie Requis

    (en cualquiera de los dos lados de la caseta). Entonces, empujarlos hacia abajo para fi jarlos en su lugar. http://go.lifetime.com/doorbaghooks WARNING The total weight on a Wall Hook should not exceed 7 lb. (3,2 kg) nor more than 30 lb. (14 kg) on a Wall Panel.

  • Page 88: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO 88 88...
  • Page 89 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIX (x4) 13.1 • If one or both of the Doors scrape the fl oor when closing or are not aligned at the top, follow these steps to correct them: •...

  • Page 90: Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO NO NEW HARDWARE OR PARTS INCLUDED FOR THIS SECTION AUCUNE NOUVELLE QUINCAILLERIE OU PIÈCE INCLUSE POUR CETTE SECTION NINGÚN HERRAJE NUEVO O PIEZA INCLUIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS NO NEW HARDWARE OR PARTS INCLUDED FOR THIS SECTION AUCUNE NOUVELLE QUINCAILLERIE OU PIÈCE INCLUSE POUR CETTE SECTION...

  • Page 91: Pour Une Plate-Forme En Béton

    SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) FOR A CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON PARA UNA PLATAFORMA DE CONCRETO 5/16 in/po (8 mm) 14.1 • If you plan on anchoring your shed to a concrete platform, you must purchase the correct anchoring hardware. We recommend using a hammer drill, 5/16"...
  • Page 92 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) FOR A CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON PARA UNA PLATAFORMA DE CONCRETO 5/16 in/po (8 mm) 7/16 in/po (11 mm) 14.1 • If you plan on anchoring your shed to a wood platform, you must purchase the correct anchoring hardware. We recommend using a drill, 5/16"...
  • Page 93 NOTES / REMARQUES / NOTAS 93 93...
  • Page 94 NOTES / REMARQUES / NOTAS 94 94...

  • Page 95: Cleaning & Care

    Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.

  • Page 96: Registration

    REGISTER today! ENREGISTRER CE PRODUIT EN LIGNE À WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.

  • Page 97: Warranty

    All merchandise is sold on this condition, and no representative of the company may waive or change this policy. 5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional or commercial use will void the warranty.

  • Page 98: Garantie De Fabrication Limitée De 10 Ans

    2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. © Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur. Les frais d’expédition aller et retour de l’usine ne sont pas couverts et sont à...

  • Page 99: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que las casetas Lifetime estarán libres de defectos de material o de mano de obra por un período de 10 años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.

  • Page 100: Améliorer Votre Achat Lifetime

    ® AMÉLIORER VOTRE ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU DES AUTRES PRODUITS ® Pour acheter des accessoires ou des autres produits Lifetime , rendre-nous visite à : www.lifetime.com Ou composer au 1-800-424-3865 Du lundi au vendredi 7 h – 17 h (HNR) et samedi 9 h – 13 h (HNR) ®...

Table des Matières