Setting The Time And Date Manually - ADE WS 1822 Mode D'emploi

2. Restart reception manually, see "Manually starting
3. Wait until the base station automatically switches
4. Manually perform the settings if reception is not
1. Check whether you have inserted the batteries
2. Check whether the location of the wireless outdoor

Setting the time and date manually

1. Press and hold down the SET button until "00" flashes
2. Use the
3. Press SET.
4. Proceed as previously described:
Weather Station with Wireless Outdoor Sensor WS 1822
FW Station WS 1822 3 Sprach.indb 51
signal reception".
back to reception at a later time. The reception is
usually better at night.
possible at your location, see "Setting the time and
date manually".
No data display from the wireless outdoor sensor
correctly.
sensor is suitable, see "Choosing a location".
If there is more than approx. 8 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
on the display.
/
most countries in Europe, "00" is the correct setting).
buttons to select your time zone (for
51
21.06.2018 15:33:59