ADE WS 1822 Mode D'emploi page 61

Setting temperature range.
1. Only if you have several wireless outdoor sensors are
2. Press and hold down the ALERT button until the upper
3. Use the
4. Press ALERT in order to save the entry.
5. Use the
6. Finally, press ALERT.
Disabling/enabling temperature alarm
− Press ALERT once briefly to disable or enable the
‚ first 3 warning beeps
‚ then 5 warning beeps each minute
Weather Station with Wireless Outdoor Sensor WS 1822
FW Station WS 1822 3 Sprach.indb 61
connected with the base station: Using the button,
select the desired sensor (mind the channel indication).
value flashes on the display.
/
limit.
/
limit.
The process is complete and the temperature
alarm is active. You will recognise the symbol
shown on the left, which appears in the lower
part of the display.
temperature alarm
Once the temperature range has been
reached, warning beeps will sound and the
symbol and temperature display will flash.
buttons to set the upper temperature
buttons to set the lower temperature
61
21.06.2018 15:34:00