Setting The Time And Date Manually - ADE WS 1911 Mode D'emploi

No data display from the wireless outdoor sensor
1. Check whether you have inserted the batteries
correctly.
2. Check whether the location of the outdoor sensor is
suitable, see "Choosing a location".
3. Press and hold
to the outdoor sensor.

Setting the time and date manually

If there is more than approx. 30 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
1. Keep the
symbol and "ON" or "OFF" flash on the display.
2. Use the
of the time signal transmitter to "ON" (recommended).
3. Press
4. Proceed as previously described.
− Press
− Press the
5. Carry out the following settings:
− Time zone you are in (for mainland Europe, select 00)
− 24- or 12-hour display
− Hours
− Minutes
64
to manually start signal reception
button pressed until the radio tower
or button to set the automatic reception
in order to save the settings. On display "00".
to save a setting.
or button to set the desired value.
WS 1911 weather station