Alarm; Setting The Alarm Time - ADE WS 1822 Mode D'emploi

Terminating temperature alarm
‚ The alarm remains active as long as the temperature
alarm conditions are valid.
‚ Press any button (except ALERT) to mute the alarm.
The temperature alarm symbol continues to flash.
‚ Press ALERT to terminate the temperature alarm.

Alarm

Setting the alarm time

1. Hold down ALARM for a few seconds until the alarm
hour indicator blinks.
The display will show "AL".
2. Using the
hour.
3. Press ALARM.
The minute indicator for the alarm time blinks on the
display.
4. Using the
minute.
5. Finally, press ALARM to save the settings.
62
FW Station WS 1822 3 Sprach.indb 62
‚ If there is more than approx. 8 seconds
between two pushes of a button, the setting
process automatically ends and you will have
to repeat it.
‚ Press and hold down
the progress of the displayed values.
and
and
Weather Station with Wireless Outdoor Sensor WS 1822
or
buttons, set the desired alarm
buttons, set the desired alarm
to speed up
21.06.2018 15:34:00