Use Additional Wireless Sensors - ADE WS 1822 Mode D'emploi

Use additional wireless sensors

The base station is supplied with a wireless sensor.
However, you can operate it with up to three outdoor
sensors. For more information or priced order please use
the following email address: service@ade-germany.de.
‚ The outdoor sensors can be situated in different
‚ Every sensor must be allocated its own number (= no.
Procedure:
1. Place the base station and wireless sensors close
2. Remove the battery compartment cover on the rear
3. For each outdoor sensor, set a unique channel using
4. Insert two batteries of the type indicated on the base.
5. Put the battery compartment cover back in place.
6. Using the CH button, select the corresponding outdoor
Weather Station with Wireless Outdoor Sensor WS 1822
FW Station WS 1822 3 Sprach.indb 55
spaces or outdoors.
of the transmission channel).
together.
side of the outdoor sensor.
the switches. Sensor included in delivery uses by
default channel 1, so select channel 2 for the second
and channel 3 for the third sensor.
Pay attention to the correct polarity (+/-).
sensor (1, 2 or 3) in order to have its data displayed.
7. Using the CH button, select the
corresponding outdoor sensor (1, 2 or 3) in
order to have its data displayed.
55
21.06.2018 15:34:00