Starting Signal Reception Manually - ADE WS 1822 Mode D'emploi

− Press the
− Press SET to save the setting you have made.
5. Carry out the following settings:
− Hours
− Minutes
− Year
− Month
− Day
− Language (refers exclusively to the display of the
6. Finally, press SET to conclude the procedure.

Starting signal reception manually

− Press and hold the
symbol is displayed again. The signal reception is thus
started manually.
Pay attention to the following:
‚ If the reception was not successful, the reception
symbol fades out after a few minutes and the time on
the display continues normally.
‚ Upon successful signal reception, the base station
adjusts itself to the time of the time signal transmitter.
If you have already made manual time and date
settings, they will be adjusted automatically.
52
FW Station WS 1822 3 Sprach.indb 52
/
weekday abbreviation)
If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The time
indicator nevertheless continues precisely.
Weather Station with Wireless Outdoor Sensor WS 1822
button to set the desired value.
button until the radio signal
21.06.2018 15:33:59