Suggestions for location
DANGER of severe injuries
− During wall installation, there
The device has a fold-out foot and a hanging
loop for wall mounting.
Where possible, select a location in which the
device is not exposed to direct sunlight.
Setting date and time
If there is more than approx. 5 seconds
between two pushes of a button, the
setting process automatically ends and
you will have to repeat it.
1. Press and hold down MODE until the hour
digit flashes on the display.
2. Use UP or DOWN to set the current hour.
3. Press MODE.
4. Use UP or DOWN to set the current minute.
34
must be no electrical cables, gas or
water pipes installed in the walls
at the mounting site. There is a
risk of electric shock when drilling
otherwise!
Digital weather station WS 1817