Periodic Maintenance; Descaling Your Brewer - FLAVIA Creation 150 Manuel D'utilisation

DESCALING YOUR BREWER

Regular de-scaling will prolong the life of your Brewer and will ensure optimal brewing
performance for the life of your Brewer. It is recommended that the Brewer be de-scaled at least
once every six weeks.
Step 1: Remove the Water Filter from the Cold Tank.
Step 2: Fill the Cold Tank up to the "MAX" indication line with white wine
vinegar or descaler diluted in water according to the descaler manufacturer's
guidelines.
Step 3: Remove the Drip Tray from the Brewer and place a large
container in the dispense area.
Step 4: Turn on the Brewer and wait until the drink indicator
lights are lit steadily.
Step 5: Open the Pack Door and insert
a USED hot chocolate or swirl pack
into the Brew Head and close the Pack
Door.
DO NOT USE a COFFEE or TEA pack.
Step 6: Press the 'REGULAR' button and allow the machine to
complete a brew cycle.
Step 7: Open the Pack Door and remove the pack.
CAUTION:
Take care when removing the pack immediately after the
brewing process as it will be HOT.
Repeat steps 5-7 until the water reservoir is empty. If further descaling is required, refill the Cold Tank
with a NEW mixture of descaler or white wine vinegar and repeat steps 5-7 until Cold Tank is empty.
After descaling your Brewer we recommend flushing your Brewer with fresh water using the
'Flush' cycle described in the section 'WATER FILTER REPLACEMENT', three times.
After flushing your Brewer with water, replace the Water Filter and Drip Tray.
STORAGE
If the Brewer has been used and therefore primed, it should only be used or stored in a frost free
environment to prevent it from becoming damaged.
Before storing the Brewer you should remove and empty the Cold tank. After a period of storage
or if the system is left unused for a period greater than one week we recommend that you rinse
the Cold Tank thoroughly and perform a 'FLUSH' cycle with fresh clean water to cleanse the
Brewer.

PERIODIC MAINTENANCE

13
70
floz
(2,0L)