Setting Up Your Brewer; Installing The Water Filter; Filling With Water - FLAVIA Creation 150 Manuel D'utilisation

SETTING UP YOUR BREWER

INSTALLING THE WATER FILTER

Your Brewer is fitted with a Water Filter to ensure the water used in brewing your beverages is
of optimal quality. To maintain the quality of beverages brewed, while protecting and
the life of your Brewer, you will need to replace this filter periodically. The frequency of
replacement depends on the number of drinks brewed.
Step 1: Remove the Cold
Tank Lid.

FILLING WITH WATER

When the Brewer requires refilling with water, all the indicator lights will flash quickly.
The Cold Tank can be filled with a jug or detached from the Brewer and filled directly from a
faucet.
Carefully fill the reservoir with drinking water (no higher than the "MAX" level)
During operation the water level may be monitored via the water level indicators on either side of
the Cold Tank
Volume of water required to fill to 'MAX' level from 'LOW' level indication.
With Filter Fitted = 108 floz (3,2L)
Step 2: Insert the Water Filter and rotate it clockwise to engage
with the bayonet fitting. Replace Cold Tank Lid.
5
FOR SUBSEQUENT CHANGES OF THE
WATER FILTER PLEASE REFER TO
THE SECTION HEADED WATER FILTER
REPLACEMENT
Note: At the top of the Water Filter
cartridge there is a rotating 'date cap'
which may be set to serve as
a reminder of the anticipated
replacement date.
extending