P E R I O D I C M A I N T E N A N C E
DRAINING THE COLD WATER RESERVOIR
On occasion it maybe necessary to drain the Cold Water Reservoir. For example: when setting the
Brewer for 'plumbed' operation, when transporting (or storing) the Brewer; or when refreshing the
water supply.
MAKE SURE YOUR BREWER IS SWITCHED OFF.
Step 1
Remove the drip tray.
Step 2
Remove the cup surround liner by holding the two outer edges
and pulling forward.
Step 3
Pull the machine forward to the edge of the worktop and place
a large jug underneath.
Step 4
Remove the rubber seal and drain the water. Note that the
water may flow fast, depending on how much water is held in
the reservoir.
12