DAILY CARE OF YOUR BREWER
REFILLING WITH WATER
When the Brewer requires refilling with water, all the indicator lights will flash quickly.
The Cold Tank can be filled with a jug or detached from the Brewer and filled directly from a
faucet.
Carefully fill the reservoir with drinking water (no higher than the "MAX" level)
During operation the water level may be monitored via the water level indicators on either side of
the Cold Tank.
Volume of water required to fill to 'MAX' level from 'LOW' level indication.
With Filter Fitted = 108 floz (3,2L)
EMPTYING THE DRIP TRAY
Your Brewer does not tell you when the Drip Tray is full, so make sure that you check it regularly.
The Drip Tray and Cup Stand are dishwasher safe.
Step 1: Lift out the Drip Tray and drain
liquid contents.
Step 2: Separate the Drip Tray and Cup
Stand and clean them in warm soapy
water. Wipe the surrounding area of the
Brewer clean with a clean damp cloth.
Step 3: Reassemble and replace
Drip Tray.
10