Getting The Most From Your Brewer; Selecting Your Cup - FLAVIA Creation 150 Manuel D'utilisation

Masquer les pouces Voir aussi pour Creation 150:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GETTING THE MOST FROM YOUR BREWER

PURE WATER FOR THE FINEST TASTING BEVERAGES EVERY TIME
For a great-tasting hot beverage in every cup, replace the FLAVIA® filter every six months.
FLAVIA® filter cartridges will help protect your FLAVIA® CREATION
The organic ion exchangers and activated charcoal within the filter reduce heavy metals and other
contaminants, as well as substances such as chlorine, which could impair the flavor and aroma
of your hot beverage. The filter goes straight in the reservoir and does not require any additional
accessories to install. It also does not take up take up any extra worktop space.
Please refer to 'WATER FILTER REPLACEMENT' section of this guide for information on how to
replace or obtain a new Water Filter.
PACKS
If unopened, your packs will remain fresh and continue to make excellent drinks right up to the
best before date shown on the back of the pack.
• Packs should be stored in a cool dry place.
• Packs should not be stored in a refrigerator or freezer.

SELECTING YOUR CUP

To avoid spillage or burns, please ensure that you always use the correct size cup or mug. This
should give a minimal distance from the rim of the cup to the underside of the filter-pack when
inserted. To minimise vending mess please avoid rounded bottom cups.
1. The use of FLAVIA® paper cups is recommended. Alternative cups may
be used providing they are of similar proportions to ref. H and weigh a
minimum of 5g.
2. Use of cups that do not meet the recommended criteria
may result in overflow or mess creation.
3. For further advice on cups and mugs suitable for use with your
Brewer please contact customer service or your local FLAVIA® supplier.
CAUTION: Please be aware that the minimum cup size for use your
Brewer to avoid overflow is 11floz (325ml).
BREW HEAD ADJUSTMENT AND TRAVEL MUG FACILITY
You can easily adapt your Brewer to
accommodate your favourite mug or
cup by simply adjusting the height of
the Brew Head. The Drip Tray can also
be removed to accommodate your
travel mug.
Note:
Position the Brew Head close to the top of your cup or mug to minimize the splash
from the Brewer.
TM
7
Brewer and extend its life.
3.3" (83mm)
2.2" (56mm)
(Ref. H)
Minimum
weight 5g

Publicité

Chapitres

Table des Matières
loading

Table des Matières