Spare Parts - FLAVIA Creation 150 Manuel D'utilisation

The Indicator Lights display a sequence
other than those mentioned above.
The Pack Door cannot be closed.
The pack cannot be pierced.
The Brewer makes a "pop" sound shortly
after the Selection button is pressed.
The amount of beverage dispensed is
repeatedly too small/high and/or is
dispensing too slowly
Water leaks from the Brewer.
Liquid splashes out of, or misses the cup
altogether.

SPARE PARTS

Parts available as spares are identified on page 5 with an asterisk *. Please contact customer
service to purchase spares for your Brewer. Besides the parts identified, the Brewer has no
other user-serviceable parts.
TROUBLE SHOOTING
Contact Customer service.
Check that the Pack Door is correctly fitted
to the Brewer. Refer to page 11 for further
information.
Note: When closing the Pack Door after
inserting a pack, you will feel some resistance.
Closing the Pack Door will pierced the seal of
the freshpack and is perfectly normal.
Check that the pack is correctly inserted, and
that the Pack Door is correctly fitted to the
Brewer.
Occasionally a "pop" may be heard at the
start of a beverage being brewed; this is
normal and is confirmation of the optimal
freshness of your beverage.
The Brewer is designed to be used with the
Water Filter supplied. Ensure this is installed
in the Cold Tank. Replacement Water Filters
can be purchased by contacting customer
service.
The boiler and internal parts of the machine
may have become blocked with scale. Refer
to the section DE-SCALING YOUR BREWER
on page 13 for further information.
Ensure the Pack Door is fully closed when
brewing beverages.
Ensure the Cold Tank has not been filled
beyond the "MAX" indication line.
Ensure the Drip Tray is not overflowing.
In all other cases, switch off and unplug the
Brewer immediately and contact customer
service.
Ensure the Brew Head is as close to the top
of the cup as possible during brewing.
Ensure your cup or mug is placed in the
centre of the Cup Stand.
15