Daily Care Of Your Brewer; Emptying The Drip Tray; Refilling With Water (Appliances Set For 'Manual Fill' Only) - FLAVIA Creation 200 Manuel D'utilisation

EMPTYING THE DRIP TRAY

Note
Your Brewer does not tell you when the drip tray is full, so make sure that you check it regularly.

REFILLING WITH WATER (APPLIANCES SET FOR 'MANUAL FILL' ONLY)

The Brewer will illuminate the 'ADD WATER' symbol
During operation the water level may be monitored through the sight tube (visible from the
front of the Brewer).
Volume of water required to fill to 'MAX' level from 'LOW' level indication
With Filter Fitted
Without Filter Fitted
D A I L Y C A R E
Step 1
Lift out the drip tray and drain liquid contents
Step 2
Separate the drip tray, liner and cup stand and clean them in
warm soapy water. Wipe the surrounding area of the Brewer
clean with a damp cloth.
Step 3
Reassemble and replace drip tray.
Step 1
Lift the 'Filler lid'.
Step 2
Carefully fill the reservoir with drinking water (no
higher than the 'MAX' level)
= 90 fl oz (2.7L)
= 100 fl oz (3.0L)
10
when it requires refilling.