Motorola L6Q Guide D'installation page 45

10. Select one of the following pairing options in the Pair Camera screen:
Option
Scanning the QR Code.
Entering the Serial Number.
11. Wait for the pairing process to complete.
When pairing is complete, the Camera Information screen appears.
12. Enter the required Camera Information:
a. Enter a descriptive name into the Camera Name field.
Actions
a. Tap the Scan QR Code icon.
b. In a well lit area, aim the mobile phone
camera at the QR code inside of the
Charging Port Door.
c. Adjust the camera until a scan is made and
a chime sound is heard.
NOTE: Use the slider at the bottom
of the screen to zoom the camera
in and out as needed.
Figure 12: QR Code Location
a. Tap the Enter Serial Number icon
b. Locate the camera serial number inside the
battery compartment.
c. Enter the <serial number> into the Se-
rial Number field.
d. Tap the Pair Camera button.
NOTE: To obtain the camera serial
number without removing the Battery
Tray, try scanning the QR code with a
mobile phone camera application.
Most camera applications will display
the serial number encoded in the QR
code.
MN010089A01-AE
Chapter 2: Pre-Installation
45