Motorola L6Q Guide D'installation page 44

MN010089A01-AE
Chapter 2: Pre-Installation
8. Power on the camera:
a. Press the power button for 1 second.
The camera requires about 20 seconds to boot up, during which the LED Indication quickly blinks
green. When powered on and ready, the LED will change to constant solid green.
b. Tap Next.
Figure 11: Camera Power Button
9. Activate pairing mode on the camera.
a. Double-tap the power button.
b. Wait a few moments for pairing mode to activate.
When pairing mode is active the LED Status Indicator will blink, alternating between amber and
green.
c. Tap Continue.
44