Publicité
Les langues disponibles
Les langues disponibles
MN010089A01-AE
Chapter 2: Pre-Installation
Number
2
3
4
5
36
Option
Camera Name
System Name
Last Detection
Operation Mode
Description
●
If the aiming accuracy of
the camera is detected to
be low, Re-aim camera... is
present. Tapping begins the
aiming process.
●
If installation for this cam-
era was started and then
paused, Continue Installa-
tion Now is present. Tap-
ping resumes the installation
process from the last com-
pleted step.
Camera names are searchable
in VehicleManager and Client-
Portal and can be modified.
System Names are permanent
camera identifiers linked to each
Camera Name used for this
camera. When searching with
a System Name in VehicleMan-
ager or ClientPortal, detections
from all linked Camera Names
will appear in the results.
A list of the most recent detec-
tions made by this camera.
Toggles between Performance
Mode and Eco Mode.
●
Performance Mode uses
more power than Eco Mode
by always keeping the cam-
era on, and constantly
searching for plates in the
field of view. This mode con-
sumes more battery, but in-
creases capture rates, cap-
tures bi-directional traffic,
and allows for camera instal-
lation at intersections.
●
Eco Mode uses less power
than Performance Mode by
holding the camera in a low-
er-power state until a detec-
tion is made, before trigger-
ing capture. This mode ex-
tends battery life, and while
adequate for most scenar-
ios, lacks the benefits of Per-
formance Mode.
Publicité
