AVG AVD-306PSB Instructions D'installation Et Guide De L'usager page 25

LED LAMP REPLACEMENT
Note:

Before changing the lights, make sure that the appliance is unplugged.

When changing led lamp, protect you hands by wearing gloves.
Replacing the LED lamps:
1.Unscrew the the outer glass frame panel with a screwdriver
2.Pull out the light wire,disconnect the light wire and take down the outer glass frame panel
3.Unscrew the lamp mounting bracket
4.Replace the deffective LED lamp.
5.Reconnect the light wire and assemble the outer glass frame panel.
•
ILCOS D code for this lamp is: DSS-1.5/65-S-120/33
– Max wattage: 2x1.5W
– LED modules –rectangle LED lamp
– Voltage range: DC 12V
Dimensions :
4.72''
25
0.07''
1.1''