AVG AVD-306PSB Instructions D'installation Et Guide De L'usager page 21

INSTALLATION PROCEDURE
The hood should be positioned at a distance of 71 to 76.2 cm (28‐30'') from the cooking surface to be
effective.
1. Drill a hole 28.7'' X 10.8'' (730 X 275mm). SEE Pic 1. in the cabinet, Make sure the edge of the hole is 1.4''
wide (35mm) so that the hood is sufficiently supported..
2. Unscrew the 4 screws on the outer glass frame panel with a screwdriver, pull out the light wire, take down
the outer glass frame panel,
3. Insert the hood into the cabinet, tighten up the screws, and make sure the hood is properly installed
see Pic 3.
see Pic 2
.
21