Publicité
Les langues disponibles
Les langues disponibles
16. Important!
- For your own safety you must only use the ac-
cessories and additional units listed in the oper-
ating instructions or recommended or specified
by the manufacturer. The use of mounted tools
or accessories other than those recommended
in the operating instructions or catalog may
place your personal safety at risk.
17. Noise
- Wear ear muffs when you use the compressor.
18. Replacing the power cable
- To prevent hazards, leave the replacement of
damaged power cables strictly to the manufac-
turer or a qualified electrician. There is a risk of
electric shock!
19. Inflating tires
- Directly after inflating tires, check the pressure
with a suitable pressure gauge, for example at
your filling station.
20. Roadworthy compressors for building site opera-
tions
- Make sure that all lines and fittings are suitable
for the maximum permissible operating pressure
of the compressor.
21. Place of installation
- Set up the compressor on an even surface.
m WARNING! This electric tool generates an elec-
tromagnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed
air and blasting guns
•
The compressor pump and lines can become very
hot during operation. Touching these parts will burn
you.
The air which is sucked in by the compressor must
•
be kept free of impurities that could cause fires or
explosions in the compressor pump.
•
When releasing the hose coupling, hold the hose
coupling piece with your hand. This way, you can
protect yourself against injury from the rebound-
ing hose.
Wear safety goggles when working with the blow-
•
out pistol. Foreign bodies or blown off parts can
easily cause injuries.
•
Do not blow at people with the blow-out pistol and
do not clean clothes while being worn. Risk of in-
jury!
•
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
All manuals and user guides at all-guides.com
Safety information for paint spraying
Do not process any paints or solvents with a flash
•
point below 55° C. There is a risk of explosion!
Do not heat up paints or solvents. There is a risk
•
of explosion!
If hazardous liquids are processed, wear protec-
•
tive filter units (face guards). Also, adhere to the
safety information provided by the manufacturers
of such liquids.
The details and designations of the Ordinance on
•
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must
be observed.
•
Additional protective measures are to be under-
taken if necessary, particularly the wearing of suit-
able clothing and masks.
Do not smoke during the spraying process and/or
•
in the work area. There is a risk of explosion! Paint
vapors are easily combustible.
Never set up or operate the equipment in the vicin-
•
ity of a fire place, open lights or sparking machines.
Do not store or eat food and drink in the work area.
•
Paint vapors are harmful to your health.
The work area must exceed 30 m
•
ventilation must be ensured during spraying and
drying. Do not spray against the wind.
•
Always adhere to the regulations of the local police
authority when spraying combustible or hazardous
materials.
Do not process media such as white spirit, butyl
•
alcohol and methylene chloride with the PVC pres-
sure hose.These media will destroy the pressure
hose.
Operating pressure vessels
You must keep your pressure vessel in good work-
•
ing order, operate the vessel correctly, monitor the
vessel, carry out necessary maintenance and re-
pair work immediately and meet the relevant safety
precautions.
•
The supervisory authority may enforce essential
control measures in individual cases.
A pressure vessel is not allowed to be used if it has
•
faults or deficiencies that can endanger workers or
third parties.
Check the pressure vessel for signs of rust and
•
damage each time before using. Do not use the
compressor with a damaged or rusty pressure
vessel. If you discover any damage, then please
contact the customer service workshop.
Do not lose these safety instructions
and sufficient
3
GB | 19
Publicité
