Publicité
Les langues disponibles
Les langues disponibles
—
——————
.
-—
wass
—————
,......—.................—u—
:
.
RACK
MOUNTING
FOR PORTABILITY
The unit is cooled by means of a compulsory fan located
in the rear panel, Because the fan intakes cool air through:
. the rear panel and exhausts warm air out of the side pan-
els, portable racks must be designed to ensure that proper
air flow is maintained. The figures below show ап:ех-.
ample of a well-ventilated rack: The rear panel
is com- |
pletely open and the side panels are exposed where nec- `
essary. Refer to the dimensions (page 14) for correct po
sitioning of the rack exhaust holes...
(Side View) B
<— Front
Air exhaust
* Keep both side panels exposed for air exhaust,"
(Rear View | |
Completely. open. u
Air intake | Е
| POSITIONING THE MIXER HOUSING
!
Place the case so that the ventilation airflow paths are
not blocked.
|
|
|
N Front. |
.
less than 10 ст
К less than 10 cm
| = —
u
г
"МО
—
~
ся Rubber feet a are optional à items.
Peel the backing off of the rubber foot and stick to the
bottom of the mixer. The figure below indicates the best
positions for optimal stability.
(Bottom View)
* 40 mm = 1-9/16"
unit: mm
Publicité
