Publicité
Les langues disponibles
Les langues disponibles
GENERAL SPECIFICATIONS
MAXIMUM
OUTPUT
POWER
|
200 W @ 4 ohms 0.5 % (THD) at 1 КН2
120 W @ 8 ohms 0.5 % (THD) at 1 kHz
MAXIMUM OUTPUT LEVEL
+ 20 dB (MON OUT) Ф 600 ohms 0.5 % at 1 kHz
+ 20 dB (EFF SEND) @ 600 ohms 0.5 % at 1 kHz
TOTAL HARMONIC
DISTORTION
|
Less than 0.3 % 20 Hz — 20 KHz @ 100 W/4 ohms.
(MIC IN to SP OUT)
Less than 0.2 % 20 Hz — 20 kHz Ф + 4 dB/600 ohms
- (МІС ЇМ to LINE OUT)
FREQUENCY RESPONSE
+1,-3 dB 20 Hz — 20 kHz @ 1 W/8 ohms (SP OUT)
+ 1, — 3 dB 20 Hz —
20 kHz @ + 4 dB/600 ohms (LINE
OUT)
HUM & NOISE (20 Hz — 20 kHz) Rs = 150 ohms
- 120 dB Equivalent Input Noise
- 70 dB Residual output noise (SP OUT)
— 100 dB Residual output noise (LINE OUT/MON
OUT)
— 105 dB Residual output noise (EFF SEND)
- 77 dB (81 dB S/N) LINE OUT
Master control level at maximum level and all CH con-
trol levels at minimum level.
— 71 dB (75 dB S/N) LINE OUT
Master control
level
at maximum
level and one
CH
control level at nominal level.
— 77 dB (81 dB S/N) MON OUT
|
Master control level at maximum level and all CH MONI-
TOR control levels at minimum level.
— 71 dB (75 dB S/N) MON OUT
Master control
level at maximum
level and one
CH
` MONITOR control level at nominal level.
— 93 dB (83 dB S/N) EFF SEND
Master control level at maximum
level and all CH EFF
SEND contro! levels at minimum level.
— 85 dB (75 dB S/N) EFF SEND
Master control level at maximum level and one CH EFF
| SEND controls level at nominal level.
CROSSTALK (at 1 kHz)
60 dB adjacent input channels.
60 dB input to output.
MAXIMUM VOLTAGE GAIN
82 dB MIC IN to SP OUT
55 dB MIC IN to LINE OUT
41 dB MIC IN to REC OUT
55 dB MIC IN to MON OUT
47 dB MIC IN to EFF SEND
30 dB LINE IN to LINE OUT
30 dB EFF RTN to LINE OUT
30 dB EFF RTN to MON OUT
20 dB TAPE IN to LINE OUT `
20 dB TAPE IN to MON OUT
10
INPUT CHANNEL
EQUALIZATION
+ 15 dB maximum boost or cut in each of three bands.
HIGH : 10 kHz shelving
MIDDLE : 2 kHz peaking
М
LOW : 100 Hz shelving
GRAPHIC
EQUALIZATION
+ 12 dB maximum
boost or cut in each of seven
bands.
125, 250, 500Hz, 1 К, 2 k, 4 К, 8 kHz : peaking
LIMITER
Input overload : 15 dB
INDICATOR
LEDS
POWER
Red LED is lit when power is "ON".
PROTECTION
Red LED is lit when protection circuitry
is activated.
LIMITER
Red LED is lit when limiter circuitry is
.
activated.
PROTECTION
CIRCUIT
Power on mute
6+ 2 sec. Muting time
DC sense
DC x 2 V Output shut off
PC limiter
less than 2 ohms (Ф Load impedance
`
PHANTOM
POWER
|
+ 48 Voc is applied to electrically balanced XLR inputs (via
6.8 kohms current limiting/isolation resistors) for Phantom
powerd condenser microphones.
POWER
REQUIREMENTS
UL/CSA
model
General
model
120 V AC 60 Hz
220/240 V AC 50/60 Hz
POWER
CONSUMPTIONS
UL/CSA
model
180 W
General
model
180 W
DIMENSIONS (W x Н x D)
480 x 132 x 346.8 mm (18-7/8" x 5-3/16" x 13-5/8")
WEIGHT
12 kg (26 Ibs 7 oz)
OPTIONS
Rubber Foot x 4
*
0dB « 0.775 Vr.m.s.
*
Specifications and appearance subject to change without
notice.
Publicité
