probst WEZ-06 Instructions D'emploi page 43

Operation and Adjustment
5.2 Device operation
Most gripping goods (L-stones) with an off-centre balance point can be moved vertically with the device
(WEZ) (→ Fig. 1). However, there are elements with extremely off-centre balance points, that cannot be
adjusted via the off-centre balance.
In this case, a maximum angle of slope of max. 5° is permissible during the lifting process (→ Fig. 2).
In the case of sloping positions exceeding this during the lifting process (angle > 5°), an individual test is
URGENTLY required (consult the equipment manufacturer)!
53100438
Fig. 1
Fig. 3
15 / 22
Fig. 2
Fig. 4
GB