26
26-2
27
13
5
28
38
580
46
61
37
17
20
19
*
16
18
8
48
15
9
31
33
30
29
32
31
Serial number
Numéro de série
Seriennummer
38
Número de serie
560
Numero di matricola
39
519
43
14-7
14
25
24
22
23
200
17
6
21
7
Torque setting
*
Nm
Lbf ft
16
50
37
44
30
22
43
2. UNIT DESCRIPTION (Ref. to Fig. 9)
01
hydraulic pump
58
02
oil filler cap (
6800076)
code
03
anchor ring for shoulder strap (
59
04
integral handle
05
mechanical pressure release button (
56-1
06
battery residual power display
07
socKet for connecting the remote hand controller
40
08
socKet for connecting to external 24 v dc supply
09
quicK release female automatic hydraulic coupler (
2
09
quicK release female automatic hydraulic coupler
41
for use with insulated pump only (
code
*
10
56-1
(
remote hand controller
code
-
11
n i
mh rechargeable battery
56
-
12
self
ventilating battery charger
66
(
ft)
13
3 metre
9.8
high pressure flexible hose with quicK release
male / female automatic hydraulic couplings
59
11
14
shoulder strap (
6000354)
code
10
*
15
canvas bag for storing accessories (
16
remote pneumatic hand controller
44
3. INSTRUCTION FOR USE
The pump is supplied with the battery completely discharged; before use, fully charge the bat-
49
tery using the charger supplied (see § 3.5).
50
In order to extract the battery from its housing we recommend you lay the pump on its back
(see Fig. 2): press the release button downwards (1) remove the battery (2); to insert it, simply
64
slide it in along the guides until it locks.
65
4
3.1) Setting up
– Carry the pump using the integral handle (04) or the shoulder strap (14) attached to the rings
(03) (see Fig. 9).
35
– Position the pump on a flat surface. There are two
- vertical
, resting on its base.
- horizontal
, resting on its back where moulded ribs improve firmness and stability (see Fig. 3).
Should it be necessary however, the pump's hermetically sealed hydraulic circuit allows it to
63
operate in any position.
62
– Remove "REMOTE CONTROLLER" protective cap, connect the remote hand controller to the
socket (07) (see Fig. 4): tighten the plug (90) by turning the bezel clockwise until it locks.
– Check the high pressure hose (13), if abrasions are evident, or if the hose is kinked or damaged,
do not use; connect the hose to the hydraulic head, and to the corresponding female coupler
(09) on the pump (see Fig. 5).
4
57
6040427)
code
6000476)
code
56
3
*
54
6060122)
code
,
55
6060130)
2596112)
,
220 - 240 V / 50-60 Hz (
2596100)
51
code
42
*
58
2593309)
code
,
for use with insulated pump only (
2596113)
code
60
12
53
stable work
positions recommended:
ENGLISH