ENGLISH
PORTABLE ELECTRO-HYDRAULIC PUMP
26
1. GENERAL CHARACTERISTICS
26-2
27
13
B70M-P24
PUMP TYPE:
5
B70M-P24-KV
Max operating pressure
bar (psi):
Oil supply
litres/min (gpm):
Weight with battery
kg (lbs):
Degree of protection:
Motor
Volt DC:
Battery:
220 - 240 / 50 - 60
Battery charger supply
Volt / Hz:
Oil reservoir capacity
cm
3
(gal.):
Recommended oil:
Recommended oil for "KV"versions:
Dimensions:LxWxH
mm (inch.):
38
Safety: the pump is fitted with a maximum pressure valve and pressure switch; MPC1 gauge, is
580
available upon request (see pag. 42) to check the proper setting of the pressure switch.
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
46
– The weighted continuous acoustic pressure level equivalent A
at the work place L
is equal to .....................................................................................................................63,9 dB (A)
pA
– The maximum value of the weighted acoustic displacement pressure C
at the work place L
is ...............................................................................................................................< 130 dB (C)
pCPeak
– The acoustic power level emitted by the machine L
is equal to ................................................................................................................................................................74,5 dB (A)
37
WARNING:
20
Hydraulic pumps manufactured by Cembre S.p.A. are developed for use with
19
crimping or cutting heads. According to this specific use, they do not need and are
*
not equipped with an oil non-return safety system.
16
For this reason, use in applications different from those intended (for example with
hydraulic jacks, lifting systems or similar) can be dangerous for the operator.
Cembre S.p.A. does not accept any liability arising from the use of its hydraulics pumps
for applications different from those listed in its catalogues or other documentation.
48
15
9
31
29
B70M-P24A
B85M-P24
B70M-P24A-KV
32
700 (10,000)
850 (12,150)
0,6 (0.16)
0,5 (0.13)
9,2 (20.2)
10 (22)
IP 54
24
24 Volt NiMH
120 / 50 - 60
220 - 240 / 50 - 60
1000 (0.26)
28
38
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent
560
AGIP ITE 360 or ESSO TRANSFORMER P60 or equivalent
390x163x323 (15.3x6.4x12.7)
39
519
43
14-7
61
14
25
24
WA
22
23
17
17
6
21
7
Torque setting
18
*
8
Nm
16
50
44
30
33
30
31
11
49
200
35
Lbf ft
37
22
3
44
58
57
59
56-1
56
40
2
41
56-1
56
42
66
59
58
10
*
44
50
64
65
4
12
63
62
TABLE 2
- TABLEAU 2 - TABELLE 2
- TABLA 2 - TAVOLA 2
3
54
55
51
60
53